When we decided to build our barndominium, we wanted to try and save as much money as possible by doing as much of the work we could ourselves. One of the projects we were excited about doing ourselves was staining the concrete floors. We learned so much during this process and found that it is easier to stain concrete than you might think.
I am going to go over these topics in this post:
How we learned to stain concrete floors
The product we purchased/stain color
Step by step process on how to DIY staining the floors
total cost of this project
How we learned to stain the concrete floors:
YouTube! We watched DIY staining concrete floor videos and copied what they did step by step. There are so many resources that you can find to feel confident on taking on this project. We educated ourselves on exactly how to go about doing this before we committed to this project. I am going to go through the step by step on how we did this ourselves later in this post.
The product we purchased/stain color;
Kemiko Neutra Clean Neutralizer and Degreaser
Kemiko Stone Stain color Malay Tan
Kemiko Stone Tone Sealer
How to stain the concrete:
Step 1: CLEAN THE CONCRETE
Use the kemiko Neutra Clean Neutralizer to clean off the concrete. The bottle has step by step instructions on how to use the product. This product will remove paint, wax, grease, and dirt built up on the concrete surface. I bought a hard bristled scrub brush with a long handle to scrub and clean the floors. I also used a long industrial floor squeegee to make it easy to remove the water off the floor. Then I used a wet vacuum to remove as much access water as I could. We let the floor dry completely before we moved onto step two.
Step 2: STAIN THE CONCRETE
Use the kemiko Stone stain for this step. We used a plastic pump up sprayer to apply the stain to the concrete. The kemiko bottle has specific instructions on how to mix the stain. In a circular motion we applied the stain to the concrete. We kept the spray nozzle about a foot from the concrete surface. When staining the floors we moved throughout the rooms to make sure we finished by an exterior door. This way we would not walk on the stain before it dried. After it dried we applied a second coat of stain to the floors. Let it dry and then complete step 3
Step 3: CLEAN THE CONCRETE
Use the kemiko Neutra clean as in step one to clean the floors. I did the same process as I did in step 1
Step 4: WAX AND SEAL
This step you will apply the Kemiko Stone tone sealer. We used a stiff bristled brush to apply this product. We followed the instructions on listed on the product. In a circular motion we applied this product throughout the entire house. We did one coat of this product and after applying this product by hand we rented a buffer and shined the floors to give the seal a smooth/shiny look.
We purchased the stain from a local business in our area and ordered the product based off the square footage we were staining. This price includes the stain product and the material purchased to complete this project.
This project was one of the more stressful projects for us. Because we wanted to do it correctly and make sure it looked ok. For one thing, we were staining a $15,000.00 piece of concrete that we did not want to mess up. After it was finished I was so proud that we committed to this project. It saved us money and we learned so much during this process. I hope this post encourages someone that wants to take on this project that you can do it yourself.
Follow along on our building journey on our Instagram page: HuntFarmhouse
15 thoughts on “DIY Stained Concrete Floors”
Love your blog. At what point in your construction did you do your floors?
We are getting ready to start our barndominium. There are so many opinions on finishing the floors and when to do it. Did you have protect your floors during the construction process?
After we framed we stained the floors but if we could do it again we would stain before we framed. Yes, we put down this protective cover after we stained them.
Thank you! Did you have damage during framing, or have to deal with chalk or pencil lines?
I’m curious about how it would work to finish the floors before framing. Wouldn’t you have the protective cover down…how would they frame with that down on the floor?
what color is the paint on the walls ? we have the same color concrete floors and are looking for a similar paint color to match.
Sherwin Williams mindful grey
Like your house , where did you get the construction plans for it ?
We went to a local architect and he drew up the plans for us.
That looks absolutely stunning!
Thank you so much!
Hello! What is the sq ft of the space you stained?
1500 sq ft.
Hello, I absolutely love your wood shutters and your wrapped beams on your Barndominium. Could you please explain to me how you attached them to the metal. I’d like to do the same thing on my metal building. Did you use the same screw holes that hold up the plastic shutters provided by the metal building?
We attached a piece of wood that fit in the grooves of the metal siding. Then we attached the shutters to the piece of wood. We used wood to metal screws to attached the piece of wood to the metal. Here is the link to my Instagram where I show pictures of how we attached them. https://www.instagram.com/huntfarmhouse/p/BsBCrcKlR0z/?utm_medium=copy_link
Hi how do you like the feel of the concrete floors after living with them for a while? Do you find them to be really cold in the winter? Thanks so much. 🙂
I have really enjoyed them. We live in central texas so I do not notice them being cold. The only thing I wish we would have done is a darker stain than what we chose, or a grey color.